Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 Master Module Installation Instructions - Manual (Page 51)

Powermonitor 3000 Master Module 51
Publication 1404-IN007F-EN-P - November 2009
ControlNet Status Indicators
F2 Off Not used.
Network Status Off No power.
Flashing green No established connections.
Steady green Connected; has at least one established connection.
Flashing red Connection timeout; one or more connections to this device
has timed-out.
Steady red Duplicate IP; the IP address assigned to this device is
already in use.
Flashing green/red Selftest; this device is performing a power-up self-test.
ControlNet Optional Communication (catalog numbers ending in -ENT)
Indicator Status Description
Chan A and Chan B Off No power or channel disabled.
Steady red Faulted unit.
Alternating red/green Self-test.
Alternating red/off Incorrect node configuration.
Steady green Normal operation.
Flashing green/off Temporary errors or node is not configured to go online.
Flashing red/off Media fault or no other nodes present on network.
Flashing red/green Incorrect network configuration.
Status Off Normal operation.
Flashing green Communication card power-up self-test.
EtherNet/IP Optional Communication (catalog numbers ending in -ENT)
Indicator Status Description
CHAN A
CHAN B
NETWORK
STATUS
Powermonitor 3000