Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 Master Module Installation Instructions - Manual (Page 45)

Powermonitor 3000 Master Module 45
Publication 1404-IN007F-EN-P - November 2009
Refer to the note at the beginning of Communication Wiring on page 36 .
Configuration options for optional Ethernet communication include the IP (Internet
Protocol) address, subnet mask, default gateway IP address, and protocol.
Defaults are:
• IP address: 192.168.254.xxx where xxx is the Device ID assigned at the factory in the
range 1…247.
• subnet mask: 255.255.0.0.
• default gateway IP address: 128.1.1.1.
• protocol: CSP (PCCC) and CIP (EtherNet/IP network).
Optional ControlNet Communication
Powermonitor 3000 units with catalog numbers ending in -CNT are equipped with a
ControlNet communication interface. The ControlNet power monitor can be connected in a
single media or redundant media network. An example of a ControlNet network using
redundant media is shown here.
Powermonitor 3000 Unit ControlNet Network Example
1756-CNBR
(in 1756-A4 chassis)
ControlNet
Node
ControlNet Link
ControlNet
Node
Redundant Media
(optional)
Powermonitor 3000 Device
Powermonitor 3000 Device