Diagnostics group (cont.) – Rockwell Automation 1305 AC Drive, Firmware 1.01-3.00 User Manual User Manual
Page 107
Chapter 5 – Programming
5-39
Diagnostics Group (cont.)
[Drive Alarm]
Parameter # 60
[Drive Alarm]
Parameter Type Read Only
This parameter displays which alarm condition is present
he
6
[ r e S a
s h gh se
)
Th s p r
e er d sp ys h h
r
d
s prese
when bit 6 of [Drive Status] is high (set to 1)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Software Current Limit
Line Loss
4–20mA Loss
Bus Charging
Unused
Hardware Current Limit
Balanced
Bus Overvoltage
[Input Status]
Parameter # 55
[Input Status]
Parameter Type Read Only
This parameter displays the open (0) and closed (1) status
pu s
T 2
e er
gure 2 7
d gure 2 8 r
Th s p r
e er d sp ys he pe
)
d
sed
) s us
of inputs at TB2. Refer to Figure 2.7 and Figure 2.8 for
description of terminal connections.
Bit 7
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
TB2–6 START / RUN FORWARD
TB2–8 STOP
TB2–13 REVERSE / RUN REVERSE
TB2–14 JOG
TB2–16 SW1
TB2–17 SW2
TB2–18 SW3
Unused
Bit 6