Rockwell Automation 1305 AC Drive, Firmware 1.01-3.00 User Manual - Manual (Page 55)

Chapter 3 – Human Interface Module
3-17
PASSWORD MODE (cont.)
ACTION DESCRIPTION HIM DISPLAY
or Logout ➁
ESC SEL
Press
i. Press the Increment (or Decrement) key until “Logout” is displayed.
j. Press Enter to log out of the Password mode.
k. With HIM software versions 3.00 and up, the Password Login menu can
be programmed to appear when drive power is applied. To save the
Password Login menu as the power-up menu, simultaneously press the
Increment and Decrement keys while the Password display is active.
Password
Logout
Choose Mode
Password
➁ Logout is used to disable access to the Program, Control Logic, Clear Fault Queue, and
EEPROM modes.