Rockwell Automation 1762-IT4 Thermocouple/mV Input Module - Manual (Page 127)

1 Publication 1762-UM002A-EN-P - July 2002
Appendix
E
Module Configuration Using MicroLogix 1200
and RSLogix 500
This appendix examines the 1762-IT4 module’s addressing scheme
and describes module configuration using RSLogix 500 and a
MicroLogix 1200 controller.
Module Addressing The following memory map shows the input image table for the
module. Detailed information on the image table is located in Chapter
3.
For example, to obtain the general status of channel 2 of the module
located in slot e, use address I:e.6/2.
Channel 0 Data Word Word 0
Word 1
Word 2
Word 3
Word 4, bits 0 to 4 and 8 to 12
Word 5, bits 6 to 15
Channel 1 Data Word
Channel 2 Data Word
Channel 3 Data Word
General/Open-Circuit Status Bits
Over-/Under-range Bits
Input Image
6 words
slot e
Input Image
File
Memory Map
Bit 15 Bit 0
I:e.6/2
Input File Type
Slot
Word
Bit
Bit Delimiter
Word Delimiter Element Delimiter