Rockwell Automation 1762-IT4 Thermocouple/mV Input Module - Manual (Page 132)

Publication 1762-UM002A-EN-P - July 2002
E-6 Module Configuration Using MicroLogix 1200 and RSLogix 500
The Cal tab contains a check box for disabling cyclic calibration. See
Selecting Enable/Disable Cyclic Calibration (Word 4, Bit 0) on page
3-14 for more information.
Generic Extra Data Configuration
This tab redisplays the configuration information entered on the
1762-IT4 configuration screen in raw data format. As explained on
page E-7, you can enter the configuration information using this tab
instead of using the Chan 0-2 and Chan 3 tabs. You do not have to
enter data in both places.