Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions - Manual (Page 21)

Publication 1784-IN034D-EN-P - June 2002
Chapter
3
Install and Use the 1784-PCC Card
in Windows 2000/XP
What is in This Chapter?
Read this chapter to learn how to operate the 1784-PCC card on Windows 2000/XP.
The following table describes what this chapter contains and where to find specific
information.
In order to follow the instructions in this chapter, you must:
• have Windows 2000/XP loaded
• have the Windows 2000/XP driver for the PCC card
Table 3.A
For information about this topic: See page:
Verify the RSLinx Version Number 3-2
Locate the 1784-PCC Windows 2000/XP Driver 3-2
Install the Driver 3-3
1784-PCC Hardware Properties 3-8
Stop and Eject the 1784-PCC Card 3-8
Remove the 1784-PCC Plug-and-Play Driver 3-11
Troubleshoot the Card Installation 3-13
Update the 1784-PCC Plug-and-Play Driver Version 1.0 to
Version 1.6 or Later 3-21
Show the Card Unplug/Eject Icon on the Taskbar 3-28
IMPORTANT
You can have one 1784-PCC card configured in Windows
2000/XP. If you insert more than one 1784-PCC card into your
PC, only one of the cards will be available for use.