Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions - Manual (Page 89)

Publication 1784-IN034D-EN-P - June 2002
Chapter
7
Insert and Remove the 1784-PCC Card
What is in This Chapter?
Read this chapter to understand how to insert and remove the card from your
laptop computer. The following table describes what this chapter contains and
where to find specific information.
Insert the Card
Table 7.A
For information about this topic: See page:
Insert the Card 7-1
Remove the Card 7-3
IMPORTANT
Windows 2000/XP: If you are using Windows 2000/XP, you can
insert the card while the system is on and use the eject utility to
turn off communication to the card before you remove it from
your computer.
Windows NT 4.0: If you are using Windows NT 4.0, shut down
the computer before inserting or removing the card.
Windows 95/98/Me: If you are using Windows 95/98/Me, you
can insert or remove the 1784-PCC card from a powered
computer.