Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions - Manual (Page 71)

Install and Use the 1784-PCC Card in Windows 95/98/Me 5-3
Publication 1784-IN034D-EN-P - June 2002
After you insert the PCC card, the system detects the hardware and begins to
build the driver information needed to run the hardware. Because the driver
has not been loaded, Windows 95/98/Me displays a new hardware dialog
box and the following message:
You see:
2. Insert the installation disk into the floppy disk drive.
3. Click Next to begin the install.
You see a message telling you that the system is searching for a driver for
the new device.