Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions User Manual
Page 58
Advertising
4-8 Install and Use the 1784-PCC Card in Windows NT
Publication 1784-IN034D-EN-P - June 2002
• If you have Unicore’s CardWare, you may get the following message. Click
Done.
5. Insert the installation diskette into the floppy disk drive.
6. Access the Run window by selecting Start
⇒Run.
7. In the Run dialog box, type the path
A:\setup.exe.
where A:\ is the drive letter of your floppy disk drive.
TIP
Be sure to click Done at this screen. If you do not, you will
see this screen every time you reboot your pc.
Advertising