Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions User Manual
Page 60
Advertising
4-10 Install and Use the 1784-PCC Card in Windows NT
Publication 1784-IN034D-EN-P - June 2002
10. Click Ok.
When this portion of the installation is complete, you see:
11. Remove the driver installation diskette from your floppy drive.
12. Select Yes or click Ok to reboot your system.
13. Ignore any third-party plug-and-play software messages that may appear
here.
14. Click Ok. Your system will automatically reboot. The driver installation is
complete.
IMPORTANT
Wait for the logon screen to appear. Do not log on. Depending
on the speed of your machine, your wait could be 5 minutes or
more.
IMPORTANT
If you have Touchstone/Unicore’s CardWare, you may see a
screen that tells you the driver has not been started. Click Yes to
start the driver.
Advertising