Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions - Manual (Page 73)

Install and Use the 1784-PCC Card in Windows 95/98/Me 5-5
Publication 1784-IN034D-EN-P - June 2002
You see:
2. In the Copy files from box, specify the drive (usually A:\) that
corresponds to your floppy disk drive.
3. Press Enter or click Ok.
After the system has finished copying files, you should hear two upward
tones that indicate the card is ready to use. If you do not hear these tones,
check to see that your speakers/sound are enabled.
5. Run the 1784-PCC test utility as described in Chapter 6 to verify your
installation. If the test fails, refer to the section entitled Troubleshoot the
Card Installation on page 5-9 of this manual.