Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions - Manual (Page 53)

Install and Use the 1784-PCC Card in Windows NT 4-3
Publication 1784-IN034D-EN-P - June 2002
Do You Have Any of the Following Third-Party Plug-and-Play PC Card
Controller Software Installed?
SystemSoft’s CardWizard
The 1784-PCC Windows NT driver does not work with SystemSoft’s CardWizard
versions prior to 5.10.06.
If you have SystemSoft’s CardWizard, you must upgrade the PC Card Controller
Software to version 5.10.06 or later for the 1784-PCC driver to function.
For more information on obtaining the CardWizard upgrade for use with the
1784-PCC card, contact your computer manufacturer or SystemSoft:
• Internet: www.systemsoft.com
• Phone: 1.800.796.0088 or 508.651.0088 (ask for sales)
If Then
you do have third-party plug-and-play
PC card controller software a PC card icon (circled in this
illustration) will appear on the
Windows task bar
you do not have third-party
plug-and-play PC card controller
software go to page 4-5 and continue with the driver installation.
TIP
To find the version of your third-party plug-and-play software,
you can usually do the following:
1. Double-click on the PC card icon in the taskbar.
2. When a dialog box appears, click Help
⇒About.