Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions - Manual (Page 51)

Publication 1784-IN034D-EN-P - June 2002
Chapter
4
Install and Use the 1784-PCC Card
in Windows NT
What is in This Chapter?
Read this chapter to learn how to operate the 1784-PCC card on Windows NT. The
following table describes what this chapter contains and where to find specific
information.
Before You Begin
Read the following before you install your 1784-PCC card, Series B or later.
Table 4.A
For information about this topic: See page:
Locate the 1784-PCC Driver for Windows NT 4-5
Install the 1784-PCC Driver 4-5
Troubleshoot the Card Installation 4-11
Remove the 1784-PCC Driver 4-17
ATTENTION
!
If you have a 1784-PCC series A interface card, you will need
to perform a flash upgrade to upgrade to series B. Refer to
Publication 1784-PCC-RN1 for details. To access this
information, visit www.ab.com\support. Click on the PC Cards
link and download the PCC_Upgrade.exe file. This file
contains both the upgrade utility and the publication
(1784-PCC-RN1) containing the instructions for completing the
upgrade.