Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions - Manual (Page 72)

5-4 Install and Use the 1784-PCC Card in Windows 95/98/Me
Publication 1784-IN034D-EN-P - June 2002
Once Windows 95/98/Me finds the driver, you should see:
4. Click Finish to install/upgrade the driver.
You may see the following message:
a. If you have not already done so, insert the diskette into the floppy disk
drive and press Enter or click Ok.
ATTENTION
!
If you do not see the message that Windows has found a
driver (as shown in the screen above), click the Other
Locations button on the screen and select the appropriate
95/98/Me driver. Refer to the table on page 5-2 for the correct
driver file to install.