Remove the 1784-pcc driver, Remove the 1784-pcc driver -17 – Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions User Manual
Page 67
Advertising
Install and Use the 1784-PCC Card in Windows NT 4-17
Publication 1784-IN034D-EN-P - June 2002
Figure 4.3 Example of new I/O drop-down selections
If you change the settings and click Ok, you need to restart your computer
for the new settings to take effect.
Remove the 1784-PCC Driver
You can access the uninstaller through the Windows NT Add/Remove programs
applet to remove the card’s drivers from your system.
1. Access the Control Panel by selecting Start
⇒Settings ⇒Control Panel.
2. Double-click the Add/Remove Programs icon.
TIP
In addition to the following procedure, you can also use
the unpccnt.exe utility provided with the 1784-PCC driver
to uninstall the 1784-PCC card.
Advertising