Rockwell Automation 1784-PCC ControlNet Communication Card Installation Instructions - Manual (Page 52)

4-2 Install and Use the 1784-PCC Card in Windows NT
Publication 1784-IN034D-EN-P - June 2002
.
• You must be running Windows NT 4.0 with Service Pack 3 or later.
• You can use only one 1784-PCC card at a time in Windows NT.
• You must have RSLinx 2.00.97 or greater.
ATTENTION
!
The 1784-PCC series B interface card and NT Driver are
designed for use in notebook PCs equipped with NT 4.0
from the original manufacturer and certified by Microsoft.
If your PC is not certified, it may not be compatible for use
with the 1784-PCC series B card under NT 4.0.
IMPORTANT
Before you can install the driver for the 1784-PCC/B card, you
must be logged in as an administrator of the machine. Being an
administrator gives you permission to install or make changes to
the machine software. If you try to install the driver without
being an administrator, you will get error messages and the
driver will not install.