Rockwell Automation 1771-IXE/D Thermocouple/Millivolt Input Module User Manual User Manual

Page 16

Advertising
background image

2–2

Installing the Thermocouple/Millivolt Input Module

Publication 1771Ć6.5.130 Ć May 1999

If this product has the CE mark it is approved for installation within
the European Union and EEA regions. It has been designed and
tested to meet the following directives.

EMC Directive

This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards,
in whole or in part, documented in a technical construction file:

EN 50081-2EMC – Generic Emission Standard,
Part 2 – Industrial Environment

EN 50082-2EMC – Generic Immunity Standard,
Part 2 – Industrial Environment

This product is intended for use in an industrial environment.

Low Voltage Directive

This product is tested to meet Council Directive 73/23/EEC
Low Voltage, by applying the safety requirements of EN 61131–2
Programmable Controllers, Part 2 – Equipment Requirements and
Tests.

For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as Allen-Bradley publication
1770-4.1, Industrial Automation Wiring and Grounding Guidelines.

Open style devices must be provided with environmental and safety
protection by proper mounting in enclosures designed for specific
application conditions. See NEMA Standards publication 250 and
IEC publication 529, as applicable, for explanations of the degrees of
protection provided by different types of enclosure.

The 1771-IXE module can be used with any 1771 I/O chassis.
Compatibility and data table use is listed below.

C

Use of Data Table

Compatibility

Catalog

Number

Input

Image

Output

Image

Read

Block

Write

Block

Addressing

Chassis

S i

Image

Bits

Image

Bits

Block

Words

Block

Words

1/2ĆSlot

1ĆSlot

2ĆSlot

Series

1771ĆIXE/D

8

8

12/13

27/28

Y

Y

Y

A, B

A = Compatible with 1771ĆA1, ĆA2, ĆA4

B = Compatible with 1771ĆA1B, ĆA2B, ĆA3B, ĆA3B1, ĆA4B

Y= Compatible without restriction.

Do not use this module with cat. no. 1771-AL PLC-2/20 or 2/30
Local Adapter.

Understand Compliance to

European Union Directives

Understand Product

Compatibility

Advertising