Rockwell Automation 1771-IXE/D Thermocouple/Millivolt Input Module User Manual - Manual (Page 30)

4–2 Module Configuration
Publication 1771Ć6.5.130 Ć May 1999
The thermocouple/millivolt input module accepts the following types
of inputs:
Table 4.A
Types of Inputs
Input Type Input Type
Temperature
Range o C
Bits
00 01 02
Bits
03 04 05
Millivolt Millivolt -100 to +100 0 0 0 0 0 0
Thermocouple E -270 to 1000 1 0 0 1 0 0
J -210 to 1200 0 1 0 0 1 0
K -270 to 1380 1 1 0 1 1 0
T -270 to 400 0 0 1 0 0 1
R -50 to 1770 1 0 1 1 0 1
S -50 to 1770 0 1 1 0 1 1
1 1 1 1 1 1
The input type is selected by setting bits in the block transfer write
(BTW) file. Two different inputs can be selected. You can have 4
inputs set for one type, and 4 inputs set for another type; or you can
have all inputs the same. If you select different types of inputs, set bit
06 to 1. If you do not select 2 different input types, the module
defaults to all inputs set to those selected by bits 00 –02.
Set these bits
for input type. Set this bit for 2 different
input types (see table 5.D)
Word 17 16 15 14 13 12 11 10 07 06 05 04 03 02 01 00
1 SampleTime Format T 0 E Input Type Input Type
The temperature scale reported by the module is selected by setting
bit 10 in the configuration word. When bit 10 is set (1), the
temperature is reported in degrees Fahrenheit. When reset (0), the
temperature is reported in degrees Celsius.
The temperature bit 10 is ignored when the millivolt input type is
selected.
Input Type
Temperature Scale