Rockwell Automation 1771-IXE/D Thermocouple/Millivolt Input Module User Manual - Manual (Page 5)

Using This Manual P–3
Publication 1771-6.5.130 - May 1999
Table P.A Compatibility and Use of Data Table
Catalog
Number
Use of Data Table
Input Output Read Write
Image Image Block Block
Bits Bits Words Words
Compatibility
Addressing Chassis
1/2 -slot 1-slot 2-slot Series
1771-IXE/D 8 8 12/13 27/28 Yes Yes Yes A and B
A = Compatible with 1771-A1, A2, A4 chassis.
B = Compatible with 1771-A1B, A2B, A3B, A4B chassis.
Yes = Compatible without restriction
No = Restricted to complementary module placement
You can place your input module in any I/O module slot of the I/O
chassis. You can put:
•
two input modules in the same module group
•
an input and an output module in the same module group.
Do not put the module in the same module group as a discrete high
density module unless you are using 1 or 1/2 slot addressing. Avoid
placing this module close to AC modules or high voltage DC
modules.
For a list of publications with information on Allen–Bradley
programmable controller products, consult our publication index
SD499.
Related Publications