Rockwell Automation 1772-LV Mini-PLC - 2/15 Programmable Controller (Series B) Programming and Operations - Manual (Page 103)

Operations Overview
Chapter 7
7Ć3
5. Connect the AC power cord of the industrial terminal to the incoming AC
power source.
6. Connect one end of the PLC-2 Program Panel Interconnect Cable (cat. no.
1772-TC) to CHANNEL A at the rear of the industrial terminal.
7. Connect the other end of the cable to the socket labeled INTERFACE at
the front of the controller.
8. Place the PLC-2 Family Keytop Overlay (cat. no. 1770-KCB) onto the
keyboard.
9. Turn the power switch on the front of the industrial terminal to the ON
position.
10. Select your desired processor mode by turning the keyswitch to PROG.
Refer to our Publication Index (publication SD499) for additional literature
information regarding our peripheral equipment.
WARNING: Use only Allen-Bradley authorized programming
devices to program Allen-Bradley programmable controllers.
using unauthorized programming devices may result in
unexpected operation, possibly causing equipment damage
and/or injury to personnel.