Rockwell Automation 1772-LV Mini-PLC - 2/15 Programmable Controller (Series B) Programming and Operations - Manual (Page 6)

Chapter
1
1Ć1
Introduction
NOTE: Read this chapter before you use the series B Mini-PLC-2/15
programmable controller (cat. no. 1772-LV). It will tell you how to use this
manual properly and efficiently.
The Mini-PLC-2/15 programmable controller has been revised to meet
customer needs when programming. An additional EAF EPROM hardware
feature has been added to meet your programming needs. If you choose to take
advantage of this hardware feature, consult your local Allen-Bradley Distributor
or Sales Representative for additional product information.
This manual focuses on the Mini-PLC-2/15 system. It is divided into three
major sections: Operations, Programming, and a Quick Reference.
The Programming section informs you about basic theory concerning the
hardware features and programming techniques available to you when using this
system.
The Operations section informs you step by step about each programming
function.
The Quick Reference section acts as a guide so you can minimize production
down time.
This manual is procedure oriented. This means that it will tell you how to
operate your Mini-PLC-2/15 system. our training center educates you about the
Allen-Bradley technology. If you are a new user and are unfamiliar with our
technology we suggest that you contact our training center:
Allen-Bradley Training Center
6880 Beta Drive
Highland Heights, Ohio 44143
Phone: (216) 646-6777
Purpose
To The Reader