Rockwell Automation 1772-LV Mini-PLC - 2/15 Programmable Controller (Series B) Programming and Operations - Manual (Page 24)

Mini-PLC-2/15 System:
An Overview
Chapter 3
3Ć5
WARNING: Do not use the on-line programming feature of
the Mini PLC-2/15 when the 1770-T3 industrial terminal is
connected to the processor through a series A Communications
Adapter Module (cat. no. 1771-KA). Unpredictable machine
operation could result and cause damage to your equipment,
and/or injury to your personnel.
Key Sequence:
Remote program mode - [SEARCH] [5] [9] [2]
Remote test mode - [SEARCH] [5] [9] [1]
Remote run/program mode - [SEARCH] [5] [9] [0]
On-line data change - [SEARCH] [5] [1]
On-line programming - [SEARCH] [5] [2]
Power Supply
Purpose: Provides regulated 5.1V DC power to the processor and I/O modules.
Provides 5V DC power to the memory circuitry of the processor module.
Hardware: System Power Supply Module (ct. no. 1771-P1)
Function: Monitors the incoming AC voltage for the below levels:
98 to 132V AC for 120V AC operations
196 to 250V AC for 220 or 240V AC operations
Power Cable
Purpose: Connects the system power supply module and battery pack to the
I/O chassis.
Hardware:
Cat. no. 1771-CL I/O Power Cable (1 ft/30.5cm)
Cat. no. 1771-CM I/O Power Cable (5 ft/1.5m)
AC Input Fuse
Purpose: Guards against overcurrent conditions on the AC input line.
Sizes:
1.0 amp fuse for 120V operations
0.5 amp fuse for 220 or 240V operations