Rockwell Automation 1772-LV Mini-PLC - 2/15 Programmable Controller (Series B) Programming and Operations - Manual (Page 20)

Chapter
3
3Ć1
MiniĆPLCĆ2/15 System: An Overview
This chapter focuses on the complete Mini-PLC-2/15 system. In this chapter
you will read about:
Major components
General features
Hardware features
Optional features
This chapter is a synopsis of our Mini-PLC-2/15 Assembly and Installation
Manual, publication 1772-803.
A complete programmable controller system consists of the following major
components:
A series B Mini-PLC-2/15 processor module
An I/O chassis
A system power supply
I/O modules (up to 16 modules)
Industrial Terminal System (cat. no. 1770-T3)
The system provides the following features:
2K CMOS RAM memory
488 timers and counters
1920 word capacity data table
Ladder diagram and functional block instruction set
Four function arithmetic capabilities
EAF instruction capability
Remote mode selection
On-line programming
Block transfer capability
70 message storage
Data highway compatibility
This system comes equipped wit the following hardware features: Refer to
Figure 3.1 for their location.
Objectives
Major Components
General Features
Hardware Features