Rockwell Automation 1784-KTS_KTX_KTXD User Manual Communication Interface Card - Manual (Page 10)

P-2 To the Installer
1784-6.5.22 - November 1999
If you ordered a 1784-KTS Interface Card
The contents of your order will differ slightly from what is listed on page P-1 of
the user manual. 1784-KTS customers do not receive the utility disk.
With the 1784-KTS package, you should receive:
• one 1784-KTS communication interface card
• one 1784-KTx Communication Interface Card User Manual, publication
1784-6.5.22
If you are missing either of these pieces, contact your Allen-Bradley/Rockwell
Automation sales representative.
Handle the Card
Take these precautions to guard against ESD damage:
• Before handling the card touch a grounded object to discharge any built-static
charge.
• Avoid touching the backplane connector or interface connector pins on the
1784-KTx card.
• If the card is not in use, store it in the anti-static plastic-molded clamshell in
which it was shipped.
!
ATTENTION: The NetLinx 1784-KTx card uses CMOS technology,
which is highly sensitive to electrostatic discharge (ESD). ESD may be
present whenever you are handling the card. Handling the card without any
ESD protection can cause internal circuit damage that may not be apparent
during installation or initial use.