Rockwell Automation 1784-KTS_KTX_KTXD User Manual Communication Interface Card - Manual (Page 73)

Run the 1784-KTx Diagnostics for DOS B-9
1784-6.5.22 - November 1999
3. To save the configuration, press F9.
The configuration is saved in the KTXDIAG.INI file in the KTXDIAG
directory. The next time that you run diagnostics, the diagnostics program
look for this file and loads it. If you don’t save your configuration or the
diagnostic program can’t find the KTXDIAG.INI file, it substitutes the
default address and interrupt settings for the KTx card
(see page B-5 and page B-8).
4. To return to the introductory screen (see page B-6), press F10.
To change the: Press this key: And:
DH+ address F6 (DH+ Address) You will be prompted to
enter an address
DH+ [0 . . . 77]
DH-485 [0 . . .31] DH-485 address F7 (DH485 Address)