Rockwell Automation 1784-KTS_KTX_KTXD User Manual Communication Interface Card - Manual (Page 20)

2-4 Configure the Card Hardware
1784-6.5.22 - November 1999
Table 2.B System Memory Allocation
2. Record your selection(s) in Table 2.C on page 2-5.
Remember that switches 1 and 3 represent the high order digits and that
switches 2 and 4 represent the low order digits.
For example:
System Memory Address: Typical PC Assignments: Your System:
0000:0000-07000:FFFF 521 Read/Write Memory on
System Board
8000:0000-09000:FFFF 128K Read/Write Memory
Expansion in I/O Channel
A000:0000-C700:0FFF Video Buffer
C800:0000- Expansion Card Area
(Area Available for KT x
Memory Addresses)
White areas are available for
KTx card
CF00:0000-
D300:0000-
D700:0000-
E000:0000-F000:FFFF 128K ROM Reserved on
System Board
10000:0000-FF000:FFFF Unavailable for KT x
D700:0000 =
Channel 2
SW1 SW2
D 7
Channel 1
SW3 SW4