Start diagnostics – Rockwell Automation 1784-KTS_KTX_KTXD User Manual Communication Interface Card User Manual
Page 71
Advertising
Run the 1784-KTx Diagnostics for DOS
B-7
1784-6.5.22 - November 1999
Start Diagnostics
From the introductory screen (see page B-6), press F1.
You see the main menu:
The following instructions take you through running the diagnostic tests
individually and viewing the error log file.
7. Use the decision table below.
To:
Press this key:
Go to page:
F2 (On-line Configuration)
Run M16-diagnostics
F3 (M16 Tests)
Test the computer’s ability to
communicate with the KT
x
card
F4 (Computer Host Tests)
Run the KT
x
card’s self-diagnostics
F5 (KTX Card Tests)
Test the dual port’s ability to
communicate
F7 (Dual Port Tests)
Exit diagnostics
F10 (Return to Previous Menu)
Advertising