Rockwell Automation 1784-KTS_KTX_KTXD User Manual Communication Interface Card - Manual (Page 15)

1784-6.5.22 - November 1999
Chapter
1
Introduction to the 1784-KT x
Communication Interface Cards
Your 1784-KTx communication interface card (cat. nos. 1784-KTX,
1784-KTXD, and 1784-KTS) is an ISA half-sized card that must be inserted into
a 16-bit ISA or EISA expansion slot.
Important: You must not place this card in an 8-bit expansion slot. Improper
operation and damage to the card will result.
Table 1.A shows the 1784-KTx card features.
Table 1.A Features supported by KT x cards
KT x card
catalog #:
# of
channels: Active node on
these networks: Acts as remote
I/O scanner: Supported by this
Allen-Bradley software:
1784-KTX 1 DH+ or DH-485 yes • 1784-KT x Scanner
Reference Set
• 6200 Series (3)
• INTERCHANGE™
• AI
• RS Logix5 and RSLogix
500 via RSLinx
(3) Available in version 4.5 or later
PLC-2 and PLC-3
direct-connect
(1)
(1) Available via 6200 Series software
1784-KTXD 2 DH+ and/or
DH-485
(2)
(2) Available only on channel 1
yes
1784-KTS 1 yes • 1784-KT x Scanner
Reference Set