Run m16 tests, B-10 – Rockwell Automation 1784-KTS_KTX_KTXD User Manual Communication Interface Card User Manual
Page 74
Advertising
![background image](/manuals/579397/74/background.png)
B-10
Run the 1784-KTx Diagnostics for DOS
1784-6.5.22 - November 1999
Run M16 Tests
1. From the main menu (see page B-7), press F3.
You see:
Important: If you are in 8-bit mode, you’ll see only the first two lines; those
lines will indicate 8-bit mode ON and Extended M16 OFF. You
cannot run M16 tests in 8-bit mode.
Advertising