Error message – Rockwell Automation 1784-KTS_KTX_KTXD User Manual Communication Interface Card User Manual
Page 61
![background image](/manuals/579397/61/background.png)
Run the 1784-KTx Card Diagnostics for Windows NT
A-17
1784-6.5.22 - November 1999
Error Message
The following error message can occur when you run the diagnostics tool.
No KT
x cards are detected
If you receive this message, no cards were found installed in your computer.
Reasons that the diagnostic tool did not detect your card:
•
it did not get the resources you assigned to the card
•
unavailable base memory address settings
Follow the instructions in Chapter 2 and try the diagnostics again. If you
continue to get this error, call Rockwell Automation Customer Support at
440.646.5800.
•
incorrect seating in the card slot
Follow the card installation instructions in Chapter 3 and try the diagnostics
again. If you continue to get this error, call Rockwell Automation Customer
Support at 440.646.5800.