Rockwell Automation 1747-PTxx Getting Started Guide for HHT - Manual (Page 31)

Chapter 3
Creating a Program
3–6
Naming the Program and Configuring the Controller
The following indicates how to name your program and configure your
controller using the HHT.
Naming Your Program
1. Press [ENTER] to view more options.
2. Press [F1] – CHG_NAM .
3. Press [F2] – PROGRAM . The following display appears:
––––––– Change Program/File Name–––––––
File Name:
Program Name: DEFAULT
ENTER NAME: DEFAULT
F1 F2 F3 F4 F5
OFL
4. Name your program “1000.” (Press [1][0][0][0][SPACE][ENTER] .)
The program name is entered.
5. Exit this menu level by pressing [ESC] . The following display appears:
File Name: Prog Name:1000
File Name Type Size(Instr)
0 System *
1 Reserved *
2 Ladder *
F1 F2 F3 F4 F5
CHG_NAM CRT_FIl EDT_FIL
OFL
DEL_FIL > MEM_MAP
Program Name
The program directory now shows the name of the program, which is 1000.