Rockwell Automation 1747-PTxx Getting Started Guide for HHT - Manual (Page 32)

Chapter 3
Creating a Program
Getting Started Guide
for HHT
3–7
Configuring the Processor
1. Press [ENTER] to view the additional menu functions (as indicated by the
> symbol in the lower right corner). The following display appears:
File Name: Prog Name:1000
File Name Type Size(Instr)
0 System *
1 Reserve *
2 Ladder *
F1 F2 F3 F4 F5
EDT_DAT SEL_PRO EDT_I/O
OFL
CLR_MEM >
2. Press [F2] – SEL_PRO . The following display appears:
Type = 1747–L511 CPU–1K USER MEMORY
Series =
Memory Size = 1 K INSTRUCTIONS
F1 F2 F3 F4 F5
TYPE SERIES
3. Press [F1] – TYPE . The following display appears:
Type = 1747–L511 CPU–1K USER MEMORY
Series =
Memory Size = 1 K INSTRUCTIONS
F1 F2 F3 F4 F5
Type = 1747–L511 CPU–1K USER MEMORY
OTHER
4. Use the cursor keys ( [
↑
] or [
↓
] ) and press [ENTER] to select the the right
processor type. (For our example, we want the 1747–L511 type;
therefore, we just press [ENTER] ). Processor module 1747–L511 is
entered into memory.
5. Press [ESC] to return to the following display:
File Name: Prog Name:1000
File Name Type Size(Instr)
0 System *
1 Reserved *
2 Ladder *
F1 F2 F3 F4 F5
EDT_DAT SEL_PRO EDT_I/O
OFL
CLR_MEM >