Rockwell Automation 1747-PTxx Getting Started Guide for HHT - Manual (Page 41)

Chapter 4
Online Operations
4–2
This chapter shows you how to download a program from the HHT to the
processor, then monitor the program. It assumes that you have performed the
tasks in chapter 3, and that the HHT shows the following display.
SLC 500 PROGRAMMING SOFTWARE Rel. 2.03
1747 – PTA1E
Allen–Bradley Company Copyright 1990
All Rights Reserved
F1 F2 F3 F4 F5
PRESS A FUNCTION KEY
SELFTEST TERM PROGMAINT
OFL
UTILITY
Going Online
1. Press [F5] – UTILITY . The following display appears:
File Name: Prog Name:1000
File Name Type Size(Instr)
0 System 76
1 Reserved 0
2 Ladder 3
F1 F2 F3 F4 F5
ONLINE WHO PASSWRD
OFL
CLR_MEM
2. Press [F2] – WHO .
3. Press [F3] – ATTACH .
Either the following display appears (if a program is not in processor
memory), or. . .
Program Directory
Programmer Processor
F1 F2 F3 F4 F5
PRG
MEM_PRC
Prog: 1000 Prog: DEFAULT
File: File:
Exec Files: 3 Exec Files: 3
Data Files: 9 Data Files: 3
DEFAULT FILE IN PROCESSOR
DWNLOAD OFFLINE CLR_PRC
this display appears (if a program is in processor memory).
Program Directory
Programmer Processor
F1 F2 F3 F4 F5
PRG
CLR_PRC
Prog: 1000 Prog: 2345
File: File:
Exec Files: 3 Exec Files: 3
Data Files: 9 Data Files: 9
PROGRAM FILES DIFFER
DWNLOAD OFFLINE MODE UPLOAD
Important: If the above display appears and the processor is not
in program mode, then you must change the processor
mode. To do this, press
[F4] – MODE , then
[F5] – PROGRAM , then [F2] – YES , and then [ESC] .
Downloading Your Program