Rockwell Automation 1771-KA2 Communication Adapter Module - Manual (Page 135)

Design Aids and Documentation
Chapter 10
10-9
Figure 10.8
Sample Form (publication 5032) for Command Listing--From Station
17 16 15 14 13 12 11 10 07 06 05 04 03 02 01 00
ALLEN–BRADLEY DATA HIGHWAY
COMMAND LISTING – FROM STATION
(Publication 5032 – October, 1980)
DATE:
BY:
STATION NO.
COMMANDS
AT THIS
STATION
(ENTER
INFORMATION
AS SHOWN)
STATUS
WORDS
(DARKEN USED
BITS FOR QUICK
REFERENCE.)
EXAMPLE:
START COMMAND
TYPE
PRIORITY/
NORMAL
REMOTE
STATION NO.
ADDRESSED
AREAS CONTROLLED
AT LOCAL
STATION AT REMOTE
STATION
COMMENTS
04010 WRITE N 022 060 – 062 051 – 053 PARTS COUNT
START BIT DONE BIT
LOCAL FAULT
BITS
REMOTE FAULT
BITS
ENTER WORD
ADDRESSES
START/DONE
REMOTE/LOCAL
ADJACENT
STATUS WORDS
NOTE: WHEN A START BIT IS SELECTED, A DONE BIT, A REMOTE FAULT BIT, AND A LOCAL
FAULT BIT ARE AUTOMATICALLY ASSIGNED. REFER TO USER’S MANUAL, COMMUNICATION
ADAPTER MODULE. 1
1
BITS
START COMMAND
TYPE
PRIORITY/
NORMAL
REMOTE
STATION NO.
ADDRESSED
AREAS CONTROLLED
AT LOCAL
STATION AT REMOTE
STATION
COMMENTS
BITS
FAULT