Rockwell Automation 1771-KA2 Communication Adapter Module - Manual (Page 35)

Module Installation
Chapter 3
3-11
Figure 3.7
Industrial Terminal Connection
ДД
ДД
ДД
Program Panel Interconnect
Cable (cat. no. 1772-TC)
10219a-I
Channel A
Data Highway/Processor Cable Connector
The bottom connector of a 1771–KA2 module is labeled PROCESSOR.
The communication module communicates with the station processor
through this connector. The Data Highway/Processor cable (cat. no.
1771–CN, –CO, –CR) connects from this socket to a socket on the fact of
the station processor. On a PLC–2/20 or PLC–2/30 this is the connector
labeled PROGRAM PANEL; on a Mini–PLC–2 or Mini–PLC–2/15, the
connector is labeled INTERFACE. (Refer to Figure 3.8) and on a
Mini–PLC–2/05 the socket is labeled INTFC.