Rockwell Automation 1794-IJ2XT FLEX I/O Frequency Input Modules User Manual - Manual (Page 27)

Publication 1794-6.5.11 - September 2011
Install Your FLEX I/O Frequency Input Module 17
• installing the terminal base units and securing them to the wall or panel.
Use the mounting kit Cat. No. 1794-NM1 for panel or wall mounting.
1794-NM1 Mounting Kit
To install the mounting plate on a wall or panel:
1. Lay out the required points on the wall or panel as shown in the drilling
dimension drawing.
Drilling Dimensions for Panel or Wall Mounting
(1.4)
35.5
0 1
7
2
3
4 6
7
8
9
2
+
2
+
1
2
3
4
45323
Millimeters
(inches)
Description Description
1 Mounting plate for adapter 3 Terminal base unit (not included)
2 #6 Self-tapping screws 4 Adapter module (not included)
21 (0.83)
58.5
(2.3)
58.5
(2.3)
35.5
(1.4)
35.5
(1.4)
35.5
(1.4)
Millimeters
(Inches)
45327