Rockwell Automation 1794-IJ2XT FLEX I/O Frequency Input Modules User Manual User Manual
Page 40
Advertising
![background image](/manuals/579760/40/background.png)
Publication 1794-6.5.11 - September 2011
30 Configure Your FLEX I/O Module with RSLogix 5000 Software
1. Select New Module for the I/O Configuration.
2. The Select Module dialog appears.
Select the FLEX I/O module from the Specialty module type. Click OK
3. The New Module dialog appears.
Right-click the local communication module.
Select New Module.
Advertising
This manual is related to the following products: