Rockwell Automation 1794-IJ2XT FLEX I/O Frequency Input Modules User Manual - Manual (Page 7)

ix Publication 1794-6.5.11 - September 2011
Preface
Read this preface to familiarize yourself with the rest of the manual. It provides
information concerning:
• who should use this manual
• the purpose of this manual
• related documentation
• conventions used in this manual
• terminology used in this manual
Who Should Use This
Manual We assume that you have previously used an Allen-Bradley programmable
controller, that you are familiar with its features, and that you are familiar with
the terminology we use. If not, read the user manual for your processor before
reading this manual.
Purpose of the Manual This manual is a reference guide for the 1794 Frequency Input Modules. It
describes the procedures for installing, configuring and troubleshooting your
module.
About the Vocabulary In this manual, we refer to:
• the frequency input module as the “input module”
• the Programmable Controller as the “controller”
For information on See
Overview of the Frequency Input Module Chapter 1
Install Your FLEX I/O Frequency Input Module Chapter 2
Configure Your FLEX I/O Module with RSLogix 5000 Software Chapter 3
Read and Write Configuration Maps for the FLEX I/O Module Chapter 4
Troubleshoot the Module Chapter 4
Specifications Appendix A
Electronic Data Sheet (EDS) Files Appendix B
Schematics Appendix C
Program Your Module with PLC Processors Appendix D