Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option - Manual (Page 10)

Chapter 1
Using This Manual
1 – 2
Chapter/
Appendix
Description Title
B Character Codes
Lists the ASCII characters and Color CVIM module
graphics characters that can be generated using the
character codes.
C
ASCII Commands for the
USER–PAK Option
Describes the serial port ASCII commands which apply
specifically if the USER–PAK option is installed.
Before using this manual, you should be familiar with the Color CVIM
module features and the procedures used in configuring the Color CVIM
module for operation.
•
For information regarding the Color CVIM module, refer to the Color
CVIM User’s Reference Manual, Cat. No. 5370–ND009.
•
If you plan to use the Color CVIM communications port (RS–232), refer
also to the Color CVIM Communications Manual, Cat. No. 5370–ND010.
•
If you plan to use other software option packages along with the
USER–PAK option, refer to the user’s manuals for the respective software
package as necessary.
Notices of attention are included when the Color CVIM module or peripheral
equipment could be damaged if the listed procedure is not followed. The
following format is used:
!
ATTENTION: Identifies information about practices or
circumstances that can lead to personal injury or death, property
damage, or economic loss.
Attentions help you:
•
identify a hazard
•
avoid the hazard
•
recognize the consequences
The following manuals are cited for reference in this manual:
•
User’s Reference Manual, Bulletin 5370-CVIMC, Publication No.
5370–ND009, also referred to as the Color CVIM User’s Reference
Manual in this publication.
•
Communications Manual, Bulletin 5370-Color CVIM, Publication No.
5370–ND010, also referred to as the Color CVIM Communications
Manual in this publication.
Intended Audience
Notice of Attention
Related Publications