Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option - Manual (Page 145)

Chapter 10
Loading Color CVIM / USER–PAK Configurations
10 – 4
The USER-PAK Menus and Viewports / Serial Ports configuration data is
stored in the Color CVIM module in an allotted area of memory that is also
used for storing Color CVIM MATH-PAK formulas (refer to the Color CVIM
User’s Reference Manual for more information regarding these features).
Figure 10.2 Checking available memory
Config. Output box.
Help message
Help Icon
You can check the remaining allotted memory available for these features.
To do this:
•
Pick Env.
→
Config. Output to access the Config. Output menu.
•
Pick the “help” icon to display the help message.
Two types of memory are listed in the help message:
•
RAM available : This is the amount of memory remaining in RAM (the
working configuration).
•
Archive available : This projects the amount of internal or card memory
which would remain available if the current working configuration were
saved to internal storage, or to a configuration storage card.
If either the RAM or Archive memory is depleted, further menu modification
or serial port / viewport and string creation will not be allowed.
Memory Usage: Each defined serial port or viewport defined requires 46
bytes of memory. In addition, each serial port or viewport string used
requires 58 bytes of memory.
Checking Available
Memory