Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option - Manual (Page 117)

Chapter 8
Defining Strings for Serial Ports and Viewports
8 – 28
The Repeat String feature enables the Color CVIM module to repeat a
particular string multiple times for the same event (see “Defining the Event”
in this chapter). This is accomplished through the use of an “index” number,
which is incremented through a range of values – you define this range using
the
Repeat String menu.
Figure 8.7 Setting Repeat String parameters
Repeat String box
Repeat String menu
In configuring the repeat range for a string, you set the Start , the End , and
the Increment values:
Start value
End value
Increment value
During operation in the run mode, when the event conditions are satisfied for
sending the string, the index is set to the
Start value, then:
(1) If the End value is greater than or equal to the Start value, the string
is sent.
(2) The index is incremented (according to the Increment value).
Using Repeat String