Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option - Manual (Page 139)

Chapter 9
Using Copy and Paste
9 – 3
Figure 9.2 The Copy and Paste boxes for a window
Window menu
Window 1 selected
•
Pick the Copy box to select window 1 as the source. The Paste box will
display the number of the source window – in this case, the box reads
Paste 1, for window 1.
•
Pick the Next box to select window 2.
Figure 9.3 Selecting the Paste destination
Window 2 selected
•
Pick the Paste box to copy the settings from window 1, the source tool,
to window 2.
The Paste box retains the source listing ( 1, in this case) until you select
another source.
After copying window 1 to window 2, we would then use the Pick & Place
function to reposition window 2 as desired (otherwise window 2 would retain
the same position as window 1). We could also adjust any of the other
window 2 settings, such as the ranges, threshold/filter, etc., as desired.
Example – Viewport Copy and Paste
To copy the strings and settings of viewport 1 to viewport 2, you would do
the following: