Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option - Manual (Page 143)

Chapter 10
Loading Color CVIM / USER–PAK Configurations
10 – 2
•
Pick the desired feature ( Load Config. (Int) or Load Default Config. )
on the Archival menu.
•
Pick the appropriate box ( Menus , Viewports / Serial Ports , Inspection ,
or All CVIM ) on the respective menu.
Figure 10.1 The Load Config. (Int) menu
Archival menu
Load Config ( Int )
menu
Picking any of the four boxes causes this message to appear:
•
Pick the same box again to load the configuration.
When the loading is completed, the message reads “Configuration
Loaded.”
Warning Message: Before loading the selected configuration option, the
Color CVIM module checks to see if there is enough room remaining in the
allocated memory for the current configuration. If the portion of the
configuration you are loading will not fit into the remaining memory, the
load will not occur, and this message will appear: