Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option - Manual (Page 149)

A–B
B
Appendix
B – 1
Character Codes
This appendix lists the character codes that can be used with the / (character
code) indicator to generate special characters within a text string defined for
a serial port or viewport (refer to “/ Character Code Indicator” in Chapter 8).
Table B.A
ASCII Control Codes (Serial Ports Only) *
Code Character Code Character Code Character Code Character
0 NUL 8 BS 16 DLE 24 CAN
1 SOH 9 HT 17 DC1 25 EM
2 STX 10 LF 18 DC2 26 SUB
3 ETX 11 VT 19 DC3 27 ESC
4 EOT 12 FF 20 DC4 28 FS
5 ENQ 13 CR 21 NAK 29 GS
6 ACK 14 SO 22 SYN 30 RS
7 BEL 15 SI 23 ETB 31 US
*Codes (0-31) in this table represent standard ASCII control codes which are
not applicable to viewports, except for the code 12 (FF- form feed). Used in a
viewport string, the FF character clears the entire viewport.
Objective