Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option - Manual (Page 71)

Chapter 7
Creating Custom Runtime Displays
7 – 12
Selecting Display Pages and Page Numbers
Use the Display Pages and Page # items in combination to determine how
to access the viewport during runtime. You assign the viewport to the
display type(s) and the specific page number(s) during setup. Then, during
run mode, use the
Display menu, and Page
↑ and
Page
↓ boxes, on the run
mode screen to access the page type and number, and thus show the display.
For example, you can assign a viewport to Results Page 2 . Then, during
run mode, you select the Display menu, pick Results Page, and use the
Page ↑ and/or Page ↓ boxes as necessary to display the viewport.
You can assign the viewport to several types of display, and to several
different pages of the selected display type(s). You can also assign more than
one viewport to the same display and page number(s).
To select the Display Pages :
•
Pick the Display Pages box on the Define Viewport menu to open the
Display Pages menu:
•
Pick the appropriate box(es) on the Display Pages menu.
Here are additional considerations when selecting Display Pages :
Tool Display: During setup mode, all viewports which share a runtime
display page with the current viewport are displayed on screen, if the
Tool
Display box on the System menu (accessed through the Envir/Cam
menu) is set to ON. Otherwise, only the currently selected viewport is
displayed.
Select at least one box: You must select at least one box to display the
viewport during run mode. The default is
Image Only .
“Page” Displays: During run mode, any Text or Graph viewport
assigned to “Page” displays – that is, the I/O Page , the Result Page , or
Stat Page – replaces the respective display for the page(s) it is assigned
to. A viewport assigned to Image Only , Failed Tools , or All Tools
displays is placed over any displayed tools for the respective page(s).