Accessing setup mode with user-pak installed – Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option User Manual
Page 22
Advertising
![background image](/manuals/580130/22/background.png)
Chapter 3
Installation
3 – 4
Upon installation of the USER-PAK option, access to the setup mode
requires the use of a password. The password is entered through a pop-up
keyboard which appears when you pick the
Setup
box, as shown in
Figure 3.2.
Figure 3.2 Password Entry keyboard
Password entry
keyboard
Note: The password requirement for entry can be disabled; see Chapter 4 for
more information on entering the setup mode.
Accessing Setup Mode
with USER-PAK Installed
Advertising