Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option - Manual (Page 16)

Chapter 2
Introduction to the USER–PAK Option
2 – 5
Runtime displays are those displays which appear on the monitor while the
Color CVIM is operating in run mode. You create custom runtime displays
by configuring “viewports,” using the
Config. Output feature, which
becomes available on the Envir/Cam menu with the USER-PAK option
installed. You can select display borders and background color, and you
define the viewport contents. Viewports can contain text, numerical data,
line graphics, and real-time graphs. You also define the conditions under
which viewport contents are displayed – the contents can be displayed after
each inspection, or only upon certain conditions, such as the failure of a
specific tool, for instance.
Figure 2.5 Example of a custom runtime displays
Custom Runtime Displays