Rockwell Automation 5370-CUPK Color CVIM USER-PAK Option - Manual (Page 96)

Chapter 8
Defining Strings for Serial Ports and Viewports
8 – 7
Table 8.A (pt. 3 of 3)
Data Codes
Data Code ➀ Subcodes (.s) ➀ Description of field
M.0 The total triggers (includes missed triggers).
M.s M.1 The total missed triggers.
(s = 0 to 3)
(for Total Counts)
M.2 Number of master range faults.
(for Total Counts)
M.3 The name of the configuration.
L.0 Light probe brightness value for red channel.
L.1 Light probe brightness value for green channel.
L.2 Light probe brightness value for blue channel.
L.3 Pass/fail condition for warning range (1 = pass, 0 = fail).
L.4 Pass/fail condition for fault range (1 = pass, 0 = fail).
L.5 Number of faults detected.
L.6 Nominal value for red channel.
L.7 Fault range high for red channel.
L.8 Fault range low for red channel.
L.s L.9 Warning range high for red channel.
(s = 0 to 20)
L.10 Warning range low for red channel.
(For Light Probe) L.11 Nominal value for green channel.
L.12 Fault range high for green channel
L.13 Fault range low for green channel.
L.14 Warning range high for green channel.
L.15 Warning range low for green channel.
L.16 Nominal value for blue channel
L.17 Fault range high for blue channel.
L.18 Fault range low for blue channel.
L.19 Warning range high for blue channel.
L.20 Warning range low for blue channel.
Fn.0 Value of the formula (n) result.
Fn.1 Pass/fail condition for warning range (1 = pass, 0 = fail).
Fn.2 Pass/fail condition for fault range (1 = pass, 0 = fail).
Fn.s ➁
Fn.3 Total fault count for the formula.
(n = 1 to 56)
(s = 0 to 8)
Fn.4 Nominal value for the formula.
(For Formulas)
Fn.5 Fault range high.
(For Formulas)
Fn.6 Fault range low.
Fn.7 Warning range high.
Fn.8 Warning range low
➀ Where n = tool or formula number (as appropriate). The letter s = operand subcode.
➁ The MATH-PAK option package (Cat. No. 5370–CMPK) must be installed, and
respective formulas enabled, in order for any of the “formula” codes to provide
formula data.