Chapter 9, Installing your nru, Before you begin – Rockwell Automation 2364E Non-Regenerative DC Bus Supply Unit (NRU) User Manual
Page 53: Documentation, Equipment, Tools, Before you begin -1, Documentation -1 equipment -1 tools -1, Chapter
Publication 2364E-5.01 April 2002
Chapter
9
Installing Your NRU
This chapter provides the following information for the NRU:
•
an NRU installation procedure
•
NRU checks before power up
•
NRU checks after power up
Before You Begin
Before you begin, be sure to have the items in the following list and
all items required by referenced procedures.
Documentation
•
drive system schematics
•
this manual
•
Rockwell Automation publication 2300-5.1 (if using a 2300
system) or Rockwell Automation publication S-3062 (if using
FD86N cabinets)
•
Rockwell Automation publication 2100-5.5
Equipment
•
the drive system lineup
•
wire or bus (sized per local electrical codes) to connect AC line
power to the drive system
Tools
•
tools for fastening and removing bolts
•
a means to punch holes into sheet metal for the routing of conduit
•
a means to connect AC line power to the drive system
•
a device for measuring AC voltages (rms)
•
a device for measuring DC voltages
•
a device for continuity testing